\documentclass{proc}

\usepackage[dvips]{graphicx}

% If you use a LaTeX that does not use vector fonts by default (e.g., MiKTeX),
% uncomment the following line.
\usepackage{times}

\pagestyle{empty} \setlength{\topmargin}{0.1cm}
%\setlength{\oddsidemargin}{-0.24cm}
%\setlength{\evensidemargin}{-0.24cm}
\setlength{\headsep}{0pt} \setlength{\headheight}{0pt}
\setlength{\textheight}{9.2in} \setlength{\textwidth}{17.16cm}
\setlength{\columnsep}{4mm}

\makeatletter
\def\@maketitle{%
  \vbox to 2.0in{%
    \hsize\textwidth
    \linewidth\hsize
    \centering
    {\bfseries\huge \@title \par}
    \vskip 2em
    {\large \begin{tabular}[t]{c}\@author \end{tabular}\par}
    \vfill}
}
\renewcommand\section{\@startsection {section}{1}{\z@}%
     {.7\baselineskip plus\baselineskip}{.5\baselineskip}
                                   {\normalfont\Large\bfseries}}
\renewcommand\section{\@startsection {section}{1}{\z@}%
      {.5\baselineskip\@plus.7\baselineskip}{.3\baselineskip}%
                                   {\normalfont\Large\bfseries}}
\renewcommand\subsection{\@startsection{subsection}{2}{\z@}%
       {.5\baselineskip\@plus.7\baselineskip}{.3\baselineskip}%
                                   {\normalfont\large\bfseries}}
\renewcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
      {.5\baselineskip\@plus.7\baselineskip}{.3\baselineskip}%
                                     {\normalfont\normalsize\bfseries}}
\makeatother

\renewenvironment{abstract}%
  {\normalfont
    \list{}{\labelwidth0pt
      \leftmargin0pt \rightmargin\leftmargin
      \listparindent\parindent \itemindent0pt
      \parsep0pt
      \let\fullwidthdisplay\relax
    }%
    \item[\hskip\labelsep\bfseries\abstractname\enspace --] \itshape%
}{%
  \endlist}

\newcommand{\keywordsname}{Keywords}
\newenvironment{keywords}%
  {\normalfont
    \list{}{\labelwidth0pt
      \leftmargin0pt \rightmargin\leftmargin
      \listparindent\parindent \itemindent0pt
      \parsep0pt
      \let\fullwidthdisplay\relax}%
    \item[\hskip\labelsep\bfseries\keywordsname:]}{\endlist}

\begin{document}

\title{Typing Instructions for FUSION 2009 Documents}

\author{{\bf Anna A. Author1}\\
R\&D Department\\
Very Large Corporation\\
Industrial City, UK.\\
\underbar{anna.author1@verylarge.com}\\
\and
{\bf Barry B. Author2}\\
Electrical Engineering Department\\
Way High University\\
Stratosphere, CO, U.S.A.\\
barry.author2@wayhigh.edu}

\date{}

\maketitle

\begin{abstract}
Type the abstract (100 to 150 words) using Italic font with  point
size 10.  The abstract is an essential part of the paper.  Use short,
direct, and complete sentences.  It should be as brief as possible and
concise.  It should be complete, self-explanatory, and not require
reference to the paper itself.  The abstract should be informative
giving the scope and emphasize the main conclusions, results, or
significance of the work described.  Do not use the first person; do
not include mathematical expressions; do not refer to the reference,
and try to avoid acronyms.
\end{abstract}

\begin{keywords}
Tracking, filtering, estimation, fuzzy logic, resource management.
\end{keywords}

\section{Introduction}

\noindent
These are instructions for authors typesetting for the \emph{International
Conference on Information Fusion} (FUSION 2009) to be held at the Grand Hyatt Seattle Hotel from July 6--9, 2009. This
document has been prepared using the required format. The electronic
copy of this document can be found in:\\
\underbar{http://www.isif.org/fusion2009paper\_submission.htm}.

The paper is to be written in two-column format and be right and left
justified. The column width should be 83 mm (3.3 inches). The gap
between the two columns should be 4 mm (0.15 inches).

\subsection{Instructions for authors}

\noindent
In order for the proceedings to be ready for distribution at the
conference, an electronic copy of the final version of your paper
(the Camera-Ready paper) must be submitted to the web site
(www.fusion2009.org) no later than May 15, 2009.  Please follow the
submission instructions shown on the web site.


\section{Formatting instructions}

\subsection{Length}

\noindent
The minimum number of pages for a paper is 6 and the maximum allowed
number of pages is 8.

\subsection{Title and Margins}

\noindent
Type the title 1.0 inch below the top edge of the letter size paper sheet and use 20 points typefont size.  Center the title (horizontally) on the page. Leave approximately 1 cm (0.4 inches) between the title and the name and address of yourself (and of
your co-authors, if any). Type name(s), address(es) and email in 11 points and center them (horizontally) on the page. Leave 0.8 inch margin all around with the exception of the first page where the top margin should be 1.0 inch.

\subsection{Spacing}

\noindent
Each section (or subsection) should be separated from the previous
text by 12 points (as indicated in the format/paragraph menu).

\subsection{Section and subsection headings}

\noindent
Number section and subsection headings consecutively in Arabic numbers
and type them in bold. Use point size 14 for section headings and 12
for subsection headings. Avoid using too many capital letters.  Keep
section and subsection headings always flushed left. If any further
subdivision of a subsection is needed the titles should be 12 point.

\subsection{Main text}

\noindent
Use 2 centimeters (0.8 inches) for the left and right margins. Use
Times New Roman and font size 10 for text (character size). Do not use
bold in the main text; if you want to emphasize specific parts of the
main text, use italics.  Start a new paragraph by indenting it from
the left margin (and not by inserting a blank line), except under a
section or subsection heading. Leave a margin of at least 2
centimeters (0.8 inch) at the page head for placing the final numbers
and running heads. Type on one side of a sheet only. You may type on
plain white letter paper. Typing area should not exceed 10 x 6.7
inches (25 x 17 centimeters). The text should be prepared with a
double column format and single line spacing.

\subsection{Tables}

\noindent
All tables must be numbered consecutively (in Arabic numbers). Table
headings should be placed above the table. Place tables as close as
possible to where they are mentioned in the main text.

\subsection{Figures}

\noindent
All illustrations should be original drawings or photographic prints
of originals.  Photographs should be glossy prints.  Photocopies are
often not good enough and should be avoided.  All illustrations must
be numbered consecutively (i.e., not section-wise), using Arabic
numbers.  Center figure captions beneath the figure (see Figure~\ref{fig1}).
If possible, do not assemble figures at the back of your article, but
place them as close as possible to where they are mentioned in the
main text.  No part of a figure should go beyond the typing
area. Captions should appear below graphical objects, as in
Figure~\ref{fig1}.

\begin{figure}[h]
\begin{center}\leavevmode
\includegraphics{fig1}
\end{center}
\caption{an unusual fusion data flow}\label{fig1}
\end{figure}

\subsection{Mathematical formulas}

\noindent
Mathematical formulas should be roughly centered and have to be
numbered as formula (\ref{eq1}).
\begin{equation}
\lambda_{1,2}= 0.5\bigl\lfloor c_{11}+c_{12}\pm
\sqrt{(c_{11}-c_{22})^2+4(c_{12}c_{21})}\bigr\rfloor\label{eq1}
\end{equation}

\subsection{References}

\noindent
References to the literature should be mentioned in the main text by
an Arabic number in square brackets \cite{ref1}.  List these
\cite{ref2} (in numerical
order) at the very end of your paper (under the heading References).
Start each reference on a new line with its number in square brackets
\cite{ref3}.

\section{Fine tuning}

\begin{itemize}
\item  Do not end a page with a section or subsection heading.
\item Keep footnotes to a minimum.
\item  Do not include page numbers in the text.
\end{itemize}

\subsection{Final version}

\noindent
After proofreading your paper, it must be submitted on the Fusion
2009 web site (www.fusion2009.org) electronically using PS or PDF
formats. Do not send hard copies or use other file formats - they
will not be accepted.  Proper usage of the English language is
expected of all submissions (i.e., Camera-ready papers). If you
submit using the PDF format, make sure that the PDF file looks
fine on the screen as well as in print.

Failure to follow the above guidelines may result in a submission
being rejected for publication in the conference proceedings and
CD ROM.

\section{Sources of \LaTeX\ information}

\noindent
For those who decide to use \LaTeX\ typesetting language instead of MS
Word, a separate example document can be found on the FUSION 2009
conference website at http://www.fusion2009.org.

\section{Conclusions}

\noindent
As presented in this article, data fusion involves the integration and
application of many disciplines, including communication and decision
theory, epistemology and uncertainty management, estimation theory,
digital signal processing, computer science, and artificial
intelligence.

\begin{thebibliography}{9}
\bibitem{ref1}
A. A. Author1, ``My best paper yet,'' \emph{Best Conference in the
World 2000, Optional sub-conference topic}, editors if known,
Conf. location and date, Proc. 1234, pp.~11--18.

\bibitem{ref2}
B. B. Author2, and A. Friend, ``Barry's favorite journal
  paper,'' \emph{A really great journal}, Vol 37, No. 3, pp.~433--448,
Feb. 2000.

\bibitem{ref3}
 Nobel Laureate, \emph{His book}, Publisher, Location, Year.
\end{thebibliography}
\end{document}
