ICUAS'23 Paper Abstract

Close

Paper ThC2.2

Kandath, Harikumar (International Institute of Information Technology Hyderabad), Pushpangathan, Jinraj (International Institute of Information Technology Hyderabad), Bera, Titas (Indian Institute of Science), Dhall, Sidhant (Indian Institute of Science), Bhat, M. Seetharama (Indian Institute of Science)

Development and Calibration of Autopilot Hardware for Small Fixed-Wing Air Vehicles with Flight Test Validation of Linear Output Feedback Controller

Scheduled for presentation during the Regular Session "Micro- and Mini- UAS" (ThC2), Thursday, June 8, 2023, 14:20−14:40, Room 130

2023 International Conference on Unmanned Aircraft Systems (ICUAS), June 6-9, 2023, Lazarski University, Warsaw, Poland

This information is tentative and subject to change. Compiled on April 26, 2024

Keywords Micro- and Mini- UAS, Control Architectures, UAS Testbeds

Abstract

This paper discusses the development of autopilot hardware for small fixed-wing air vehicles. Weight constraint is the critical factor in developing such hardware. The sensors and communication devices are selected based on the requirements and constraints of these air vehicles. The sensors used in the hardware are calibrated using a three-axis rotating platform. The software written in the autopilot hardware is flexible enough to incorporate complex estimation and control algorithms along with the hardware-in-loop simulations. Linear output feedback controllers are designed for fixed wing micro and nano air vehicles. Successful flight trials are conducted to demonstrate the utility of the autopilot hardware for small fixed-wing air vehicles.

 

 

All Content © PaperCept, Inc.

This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2024 PaperCept, Inc.
Page generated 2024-04-26  15:43:21 PST  Terms of use