International Gas Turbine Congress 2019 Tokyo
November 17-22, 2019, Tokyo, Japan

Program at a Glance    Sunday    Monday    Tuesday    Wednesday    Thursday    Author Index    Keyword Index  

Last updated on October 29, 2019. This conference program is tentative and subject to change

Technical Program for Wednesday November 20, 2019

To show or hide the keywords and abstract (text summary) of a paper (if available), click on the paper title
Open all abstracts   Close all abstracts
 
WeAM11 Room A
Aeroelasticity and Flutter-1 Technical Session
 
09:00-09:50, Paper WeAM11.1 
A Review of Computational Aeroelasticity of Civil Fan Blades
Vahdati, MehdiImperial College London
Sureshkumar , Prathiban Imperial College London
 
09:50-10:15, Paper WeAM11.2 
Influence of Blade Vibration on Part-Span Rotating Stall
Zhao, FanzhouImperial College London
Dodds, JohnRolls-Royce Plc
Vahdati, MehdiImperial College London
 
10:15-10:40, Paper WeAM11.3 
Identification of Low Speed Fan Flutter Trigger through Radial Decomposition of the Modeshape
Rendu, QuentinImperial College London
Stapelfeldt, SinaImperial College London
Vahdati, MehdiImperial College London
Salles, LoicImperial College London
 
10:40-11:05, Paper WeAM11.4 
Effects of Low-Order Modal Force Induced by Inlet Distortion on Fan Blade Vibrations
Yan, ZhaoqiBeihang University
Pan, TianyuBeihang University
Lu, HananBeihang University
Wu, WenqianBeihang University
Li, QiushiBeihang University
 
WeAM12 Room B
Aerodynamic and Design of Centrifugal and Mixed-Flow Compressors Technical Session
 
09:00-09:25, Paper WeAM12.1 
An Investigation into the Effect of Diffuser Vane Side Clearance Position on the Efficiency and Stability of an Automotive Turbocharger Compressor
Gibson, LeeQueen's University Belfast
Spence, StephenQueen's University Belfast
Kim, Sung InQueen's University Belfast
Schwitzke, MartinIHI Charging Systems International GmbH
Starke, AndreIHI Charging Systems International GmbH
Filsinger, DietmarIHI Charging Systems International GmbH
 
09:25-09:50, Paper WeAM12.2 
Design and Optimization of Axial Slot Casing Treatment in a Mixed-Flow Compressor
Ba, DunInstitute of Engineering Thermophysics, Chinese Academy of Scien
Du, JuanChinese Academy of Sciences
Zhang, QianfengInstitute of Engineering Thermophysics, Chinese Academy of Scien
Li, ZhihuiChinese Academy of Sciences
Zhang, HongwuInstitute of Engineering Thermophysics, Chinese Academy of Scien
Zhang, MingNanjing Tianfu Software Co., Ltd
 
09:50-10:15, Paper WeAM12.3 
Control of Leading Edge Separation and Tip Leakage Vortices in a Transonic Centrifugal Compressor Impeller Using an Inverse Design Method Based on Meridional Viscous Flow Analysis
Manabe, KaitoKyushu University
Takano, ShuKyushu University
Ito, SasugaKyushu University
Furukawa, MasatoKyushu University
Tomita, IsaoMitsubishi Heavy Industries, Ltd
Hayashi, YoshihiroMitsubishi Heavy Industries, Ltd
Oka, NobuhitoMitsubishi Heavy Industries Engine & Turbocharger, Ltd
 
10:15-10:40, Paper WeAM12.4 
Development of a Centrifugal Compressor for 2MW Class Gas Turbine Standby Generator Set
Taniguchi, KoichiIHI Power Systems Co., Ltd
Asai, HisashiNiigata Power Systems Co., Ltd
Sato, WataruIHI Corporation
 
10:40-11:05, Paper WeAM12.5 
A Numerical Investigation of Unsteady Interaction in a High-Pressure-Ratio Centrifugal Compressor
Zhang, YingjieInstitute of Engineering Thermophysics, Chinese Academy of Scien
Zhang, YanfengInstitute of Engineering Thermophysics, Chinese Academy of Scien
Lu, XingenInstitute of Engineering Thermophysics, Chinese Academy of Scien
Han, GeInstitute of Engineering Thermophysics, Chinese Academy of Scien
Junqiang, ZhuInstitute of Engineering Thermophysics, Chinese Academy of Scien
 
WeAM13 Room C
Small Gas Turbine System Technical Session
 
09:00-09:25, Paper WeAM13.1 
Influence of Passage Cross-Sectional Shape in Micro Wave Rotors
Yamano, ShotaThe University of Tokyo
Okamoto, KojiThe University of Tokyo
Fujishita, AkimasaThe Univeristy of Tokyo
Teramoto, SusumuThe University of Tokyo
Yamaguchi, KazuoThe University of Tokyo
 
09:25-09:50, Paper WeAM13.2 
Parametric Numerical Study on the Performance Characteristics of a Micro-Wave Rotor Gas Turbine
Tuechler, StefanUniversity of Bath
Copeland, ColinUniversity of Bath
 
09:50-10:15, Paper WeAM13.3 
Robust Design of a Solid Oxide Fuel Cell (SOFC) Hybrid System
Giugno, AndreaUniversity of Genoa
Cuneo, AlessandraRINA Consulting S.p.A
Traverso, AlbertoUniversity of Genoa
 
10:15-10:40, Paper WeAM13.4 
Liquid Air Energy Storage Installation Performance Characteristics As a Function of the Liquefaction Section Pressure
Krawczyk, PiotrWarsaw University of Technology, Faculty of Power and Aeronautic
Mikołajczak, AleksandraWarsaw University of Technology, Faculty of Power and Aeronautic
Badyda, KrzysztofWarsaw University of Technology, Institute of Heat Engineering
Kurkus-Gruszecka, MichalinaWarsaw University of Technology, Institute of Heat Engineering
 
10:40-11:05, Paper WeAM13.5 
Conceptual Design and Flight Simulation of a 80kW Class Turboshaft Engine with a Recuperator
Jun, YongminKorea Aerospace Research Institute
Kim, Chun TaekKorea Aerospace Research Institute
Lee, BohwaKorea Aerospace Research Institute
Kang, Young-SeokKorea Aerospace Research Institute
Kim, Jae-HwanKorea Aerospace Research Institute
 
WeAM14 Room D
Alloy Development for Blades and Coating Technical Session
 
09:00-09:25, Paper WeAM14.1 
Development of Rhenium Free Ni-Base Directionally Solidified Superalloy, TMD-1700, with Balanced Creep and Thermo-Mechanical Fatigue Properties
Yokokawa, TadaharuNational Institute for Materials Science
Kawagishi, KyokoNational Institute for Materials Science
Sasaki, EriWaseda University
Kobayashi, ToshiharuNational Institute for Materials Science
Takata, YujiNational Institute for Materials Science
Yuyama, MichinariNational Institute for Materials Science
Harada, HiroshiNational Institute for Materials Science
 
09:25-09:50, Paper WeAM14.2 
Influence of Stress, Temperature and Aging on Rafting of γ’ Phase in a Directionally Solidified Superalloy
Okada, MitsutoshiCRIEPI
Yamada, SusumuCentral Research Institute of Electric Power Industry
Shigeyama, HaruhisaCentral Research Institute of Electric Power Industry
Matsui, YoheiCentral Research Institute of Electric Power Industry
 
09:50-10:15, Paper WeAM14.3 
Development of a New Ni Based Cast Superalloy with Low Density and High Temperature Capability for Turbocharger Turbine Wheel
Ooki, YutaroReserch and Development Center, Daido Steel, Co., Ltd
Yokota, KyoheiChita Steel Strip Plant, Daido Steel, Co., Ltd
Sumi, YoshinoriReserch and Development Center, Daido Steel, Co., Ltd
 
10:15-10:40, Paper WeAM14.4 
State-Of-The-Art Ceramic Coating Processes Via Fine Particle Spraying
Suzuki, MasatoNational Institute of Advanced Industrial Science and Technology
Shinoda, KentaroNational Institute of Advanced Industrial Science and Technology
Shahien, MohammedNational Institute of Advanced Industrial Science and Technology
Akedo, JunNational Institute of Advanced Industrial Science and Technology
 
10:40-11:05, Paper WeAM14.5 
Evaluation of the TBC from 1700˚C GT Type to Be Applied in Real Applications
Takeno, KazumaMitsubishi Heavy Industries, Ltd
Okajima, YoshifumiMitsubishi Heavy Industries, Ltd
Torigoe, TaijiMitsubishi Heavy Industries, Ltd
Karato, TakanoriMitsubishi Heavy Industries, Ltd
Horie, ShigenariMitsubishi Heavy Industries, Ltd
Mega, MasahikoMitsubishi Heavy Industries, LTD
 
WeAM15 Room E
Combustor Developments Technical Session
 
09:00-09:25, Paper WeAM15.1 
Applied NOx Prediction for an Industrial Gas Turbine Combustor at Wet Hydrogen-Rich Conditions
Kroniger, DanielKawasaki Heavy Industries, Ltd
 
09:25-09:50, Paper WeAM15.2 
Flexible Fuel Operation of a Dry-Low-Nox Micromix Combustor Design with Variable Hydrogen-Methane Mixtures
Funke, Harald H.-W.Aachen Univeristy of Applied Sciences
Beckmann, NilsAachen University of Applied Sciences
 
09:50-10:15, Paper WeAM15.3 
Application of Low Nox Micro-Mix Hydrogen Combustion to 2mw Class Industrial Gas Turbine Combustor
Horikawa, AtsushiKawasaki Heavy Industries, Ltd
Okada, KunioKawasaki Heavy Industries, LTD
Uto, TakahiroKawasaki Heavy Industries, Ltd
Uchiyama, YutaKawasaki Heavy Industries Ltd
Wirsum, ManfredRWTH Aachen University
Funke, Harald H.-W.Aachen Univeristy of Applied Sciences
Kusterer, KarstenB&B-AGEMA GmbH
 
10:15-10:40, Paper WeAM15.4 
Correlation of Unburnt Ammonia and N2O Emissions of Ammonia Fired Gas Turbine Combustor
Kurata, OsamuAdvanced Industrial Science and Technology (AIST)
Iki, NorihikoAIST
Inoue, TakahiroNational Institute of Advanced Industrial Science and Technology
Matsunuma, TakayukiNational Institute of Advanced Industrial Science and Technology
Tsujimura, TakuNational Institute of Advanced Industrial Science and Technology
Furutani, HirohideAIST
Kawano, MasatoToyota Energy Solutions Inc
Arai, KeisukeToyota Energy Solutions Inc
Okafor, EkenechukwuTohoku University
Hayakawa, AkihiroTohoku University
Kobayashi, HideakiTohoku University
 
10:40-11:05, Paper WeAM15.5 
High Pressure Combustion Test of Gas Turbine Combustor for 50MWth Supercritical CO2 Demonstration Power Plant on Allam Cycle
Suzuki, ShinjuToshiba Energy Systems & Solutions Corporation
Iwai, YasunoriToshiba Energy Systems and Solutions Corporation
Itoh, MasaoToshiba Energy Systems & Solutions Corporation
Morisawa, YuichiTOSHIBA CORPRATION
Kobayahi, YoshihisaToshiba Energy Systems & Solutions Corporation
Jain, ParikshitToshiba Energy Systems and Solutions Corporation
 
WeAM16 Room F
Testing Technology Technical Session
 
09:00-09:25, Paper WeAM16.1 
Tip Clearance Measurement of a Centrifugal Compressor Impeller Using Capacitive Sensors
Kurita, FumiyaIHI Corporation
Ohuchida, SatoshiIHI Corporation
Yamada, KiwamuIHI Corporation
 
09:25-09:50, Paper WeAM16.2 
Probe Calibration Map Generation Based on Artificial Neural Network
Nikpey Somehsarai, HomamUniversity of Stavanger
Hoenen, HerwartRWTH Aachen University
Hoelle, MagnusRWTH Aachen University
Assadi, MohsenUniversity of Stavanger
 
09:50-10:15, Paper WeAM16.3 
Fast Traveling Pneumatic Probes for Turbomachinery Applications
Brüggemann, ChristophUniversity of Stuttgart
Badum, LukasTechnion, Israel Institute of Technology
Bauer, MaximilianUniversity of Stuttgart
Schatz, MarkusUniversity of Stuttgart
Vogt, DamianUniversity of Stuttgart
 
10:15-10:40, Paper WeAM16.4 
Consideration on Inlet Condensation of the Jet Engine Bell-Mouth at Ground Testing
Futamura, HisaoJAXA
 
10:40-11:05, Paper WeAM16.5 
Power Transmission Technology for Wireless Sensing under Harsh Environment
Oyama, NaokiMitsubishi Heavy Industries, Ltd
Morishita, KeiichiMitsubishi Heavy Industries, Ltd
Iizuka, KenjiMitsubishi Heavy Industries, Ltd
Yasui, JunMitsubishi Heavy Industries, Ltd
 
WeAM21 Room A
Digital/IT/Statistical Issues-1 Technical Session
 
11:25-12:15, Paper WeAM21.1 
Machine Learning for Turbomachinery
Montomoli, FrancescoImperial College of London
 
12:15-12:40, Paper WeAM21.2 
The V2500-A1 As a Test Rig towards Digital Twin Modeling
Spuhler, TobiasUniversity of Braunschweig, Institute of Jet Propulsion and Turb
Kellersmann, AndreasUniversity of Braunschweig, Institute of Jet Propulsion and Turb
Bode, ChristophUniversity of Braunschweig, Institute of Jet Propulsion and Turb
Friedrichs, JensTU Braunschweig, Institute for Jet Propulsion and Turbomachinery
Reitz, GeraldMTU Aero Engines AG
Kotulla, MichaelMTU Aero Engines
Kappei, FriedhelmMTU Maintenance Hannover
Michaelis, ThomasMTU Maintenance Hannover
 
12:40-13:05, Paper WeAM21.3 
Study on Prognosis and Diagnosis of Failure Using Machine Learning
Hirabayashi, MikiJAXA
Tsutsumi, SeijiJAXA
Satoh, DaiwaJAXA
Kawatsu, KanameJAXA
Sato, MasakiJAXA
Hashimoto, TomoyukiJAXA
Kimura, ToshiyaJAXA
 
WeAM22 Room B
Advanced Methods in Heat Transfer Technical Session
 
11:25-11:50, Paper WeAM22.1 
Multi-Objective Genetic Optimization of Rectangular Pin-Fin Arrays for Enhancing the Heat Transfer of Leading Edge on Turbine Nozzle
Kubo, SeijiIHI Corporation
Ideta, TakeomiIHI Corporation
Fujimoto, ShuuIHI
 
11:50-12:15, Paper WeAM22.2 
Multi-Objective Optimization of Non-Axisymmetric Contoured Endwall for Axial Turbines
Chen, PingtingTsinghua University
Li, XueyingTSINGHUA UNIVERSITY
Ren, JingTSINGHUA UNIVERSITY
Jiang, HongdeTSINGHUA UNIVERSITY
 
12:15-12:40, Paper WeAM22.3 
Prediction of Film-Cooling Effectiveness Based on Bayesian Model Calibration of SST Turbulence Model
Misaka, TakashiNational Institute of Advanced Industrial Science and Technology
Asaumi, NorioIHI
Kubo, SeijiIHI Corporation
Ideta, TakeomiIHI Corporation
Obayashi, ShigeruInstitute of Fluid Science, Tohoku University
 
WeAM23 Room C
Small Gas Turbine Technical Session
 
11:25-11:50, Paper WeAM23.1 
Design and CFD Evaluation of Air Inlet and Ventilation System for ZK2000 Mobile Gas Turbine Generation Sets
Dai, YunfanHelan Turbines Co., Ltd
Li, BaoHelan Turbines Co., Ltd
Gao, ChuangShanghai Advanced Research Institute, Chinese Academy of Science
 
11:50-12:15, Paper WeAM23.2 
Economic and Ecological Analysis of Industrial Distributed Energy Supply System Based on ZK1200 Gas Turbine
Sun, WenjiaHelan Turbines CO., LTD
An, ShengSuzhou Industrial Park Bluesky Gas-Cogen Power CO., LTD
Qin, LijieSuzhou Industrial Park Bluesky Gas-Cogen Power CO., LTD
Gao, ChuangShanghai Advanced Research Institute, Chinese Academy of Science
 
12:15-12:40, Paper WeAM23.3 
Flow Path Optimization for 2MW Gas Turbine with Compact Annular Recuperator
Gao, ChuangShanghai Advanced Research Institute, Chinese Academy of Science
 
12:40-13:05, Paper WeAM23.4 
Development of a 7KWe High Speed Micro Gas Turbine for Power Generation
Thiriot, JulienIFPEN
 
WeAM24 Room D
Unsteady Flow and Stability Enhancement in Compressors-1 Technical Session
 
11:25-11:50, Paper WeAM24.1 
Using Fast Wavelet to Predict the Stall in Multi-Stage Axial Flow Compressor
Liu, YangInstitute of Engineering Thermophysics,Chinese Academy Of
Li, Ji-ChaoChinese Academy of Science
Du, JuanChinese Academy of Sciences
Zhang, HongwuInstitute of Engineering Thermophysics, Chinese Academy of Scien
 
11:50-12:15, Paper WeAM24.2 
Numerical Study of Loss Mechanism Based on Entropy Generation Theory in a Compressor with Casing Treatment
Jin, YunInstitute of Engineering Thermophysics, Chinese Academy of Scien
Du, JuanChinese Academy of Sciences
Zhang, QianfengInstitute of Engineering Thermophysics, Chinese Academy of Scien
Li, ZhihuiChinese Academy of Sciences
Zhang, HongwuInstitute of Engineering Thermophysics, Chinese Academy of Scien
 
12:15-12:40, Paper WeAM24.3 
Stall Inception Analysis of Low-Speed Axial Fans with Swept Rotor Blades
Xu, DengKeBeihang University
He, ChenBeihang University
Sun, DakunBeihang University
Sun, XiaofengBeiHang University
 
12:40-13:05, Paper WeAM24.4 
Study of Unsteady Flow Effects in a Multi-Stage Axial Compressor with High-Fidelity Numerical Simulations
Hah, ChunillNASA Glenn Research Center
 
WeAM25 Room E
Aeroelasticity and Flutter-2 Technical Session
 
11:25-11:50, Paper WeAM25.1 
The Influence of Spontaneous Condensation on the Predicted Aerodynamic Damping of a Steam Turbine Tip Section
Fuhrer, ChristopherUniversity of Stuttgart
Vogt, DamianUniversity of Stuttgart
 
11:50-12:15, Paper WeAM25.2 
Linear and Non-Linear Unsteady Comparison of Aerodynamic Forces of Vibrating Blade Cascades
Naval, ChristopherKyushu University
Yamasaki, NobuhikoKyushu University
Okumura, ChitoseKyushu University
 
12:15-12:40, Paper WeAM25.3 
Investigation of Flutter Stability of a High-Speed Transonic Fan in Different Conditions
Dong, XuInstitute of Engineering Thermophysics, CAS, University of Chine
Zhang, YingjieInstitute of Engineering Thermophysics, Chinese Academy of Scien
Zhang, ZiqingInstitute of Engineering Thermophysics, Chinese Academy of Scien
Zhang, YanfengInstitute of Engineering Thermophysics, Chinese Academy of Scien
Lu, XingenInstitute of Engineering Thermophysics, Chinese Academy of Scien
 
12:40-13:05, Paper WeAM25.4 
Flutter Analysis of Compressor Transonic Blade
Shen, ZhenShanghai Electric Gas Turbine Co., Ltd
Li, HuaShanghai Electric Gas Turbine Co., Ltd
Zhao, LianhuiShanghai Electric Gas Turbine Company Co., Ltd
He, LeiShanghai Electric Gas Turbine Company Co., Ltd
 
WeAM26 Room F
Frontier on Computational Fluid Dynamics in Gas Turbines-1 Technical Session
 
11:25-11:50, Paper WeAM26.1 
Prediction of Profile Losses in an Axial Compressor Cascade Using Large Eddy Simulation
Lee, YuntaeThe University of Tokyo
Teramoto, SusumuThe University of Tokyo
Okamoto, KojiThe University of Tokyo
 
11:50-12:15, Paper WeAM26.2 
Hybrid RANS/LES Study of the Complex Turbulence Characteristics and Flow Mechanism in a Highly-Loaded Turbine Blade
Bian, XiutaoInstitute of Gas Turbine, Department of Energy and Power Enginee
Qingsong, WangTsinghua University
Su, XinrongTsinghua University
Yuan, XinTsinghua University
 
12:15-12:40, Paper WeAM26.3 
Profile Aerodynamics of an Oscillating Low-Pressure–Turbine Blade
Schwarzbach, FelixLeibniz Universität
Mimic, DajanLeibniz Universität Hannover
Herbst, FlorianLeibniz Universität Hannover
 
WePM12 Room B
Endwall Cooling Technical Session
 
15:00-15:25, Paper WePM12.1 
Film Cooling Performance of Endwall Vertical Hole for the Horse Shoe Vortex Formation Region
Chen, ZiyuTsinghua University
Su, XinrongTsinghua University
Yuan, XinTsinghua University
 
15:25-15:50, Paper WePM12.2 
A Multi-Plenum Superposition Method for Scalar Transport with Application to Endwall Film Cooling
Alqefl, MahmoodUniversity of Minnesota
Nawathe, KedarUniversity of Minneosta
Chen, PingtingTsinghua University
Zhu, RuiNorthwestern Polytechnical University
Simon, TerrenceUniversity of Minneosta
 
15:50-16:15, Paper WePM12.3 
Aerodynamic Effects of Turbine Vane End Wall Film Cooling for Different Purge Slot Configurations in a Linear Cascade
Landfester, ChristianUniversity of Kaiserslautern
Mueller, GuntherUniversity of Kaiserslautern
Krewinkel, RobertMAN Energy Solutions SE
Boehle, MartinTechnical University Kaiserslautern
 
16:15-16:40, Paper WePM12.4 
Study on the Film Cooling Effect of Purge Flows at First-Stage Vane Using Fast-Response PSP Technique
Shirazawa, HisashiKansai University
Oda, YutakaKansai University
Takeishi, KenichiroTokushima Bunri University
 
WePM13 Room C
Design and Performance Evaluation in System Perspective Technical Session
 
15:00-15:25, Paper WePM13.1 
Experimental Investigation and Computational Performance Assessment of Tesla Air Micro-Expanders
Renuke, AvinashUniversity of Genoa
Traverso, AlbertoUniversity of Genoa
Pascenti, MatteoUniversity of Genoa
 
15:25-15:50, Paper WePM13.2 
Simulation of the Transient and Part-Load Operation of Gas Turbines
Petrovic, Milan V.University of Belgrade
Wiedermann, AlexanderMAN Diesel & Turbo SE
Petkovic, DjordjeUniversity of Belgrade - Faculty of Mechanical Engineering
Banjac, MilanUniversity of Belgrade - Faculty of Mechanical Engineering
Milic, SrdjanUniversity of Belgrade - Faculty of Mechanical Engineering
 
15:50-16:15, Paper WePM13.3 
Design, Optimisation and Experimental Evaluation of Two Radial Inflow Turboexpanders for Mobile Organic Rankine Cycle Applications
Robertson, MilesImperial College London
Newton, PeterImperial College London
Chen, TaoImperial College London
Costall, Aaron WilliamImperial College London
Martinez-Botas, RicardoImperial College London
 
16:15-16:40, Paper WePM13.4 
Overview of Aero-Engine, Airframe and Flight Characteristic Influence on the Flight Mission Energy Consumption
Fukuyama, YoshitakaJapan Aerospace Exploration Agency
Yamane, TakashiJapan Aerospace Exploration Agency
Nishizawa, ToshioJapan Aerospace Exploration Agency
 
WePM14 Room D
Unsteady Flow and Stability Enhancement in Compressors-2 Technical Session
 
15:00-15:25, Paper WePM14.1 
Unsteady Aerodynamics of a High Pressure Compressor Working under Pressure Gain Combustion Disturbances
Bicalho Civinelli de Almeida, VictorTechnical University of Berlin
Motta, ValentinaGE Renewable Energy
Peitsch, DieterTechnical University of Berlin
 
15:25-15:50, Paper WePM14.2 
Unsteady Aerodynamic Characteristics of Transonic Oscillating Compressor Cascade with Double Shock Waves
Gan, JiuliangThe University of Tokyo
Watanabe, ToshinoriThe University of Tokyo
Himeno, TakehiroThe University of Tokyo
Sakuma, YasunoriThe University of Tokyo
 
15:50-16:15, Paper WePM14.3 
Investigation on Signal Characteristic of Rotor-Stator Interaction for Centrifugal Compressor
Li, HongkunDalian University of Technology
 
16:15-16:40, Paper WePM14.4 
Evolution Process of Separated Vortical Flow Phenomena in Transonic Centrifugal Compressors with Vaneless Diffuser at Near-Surge
Ito, SasugaKyushu University
Furukawa, MasatoKyushu University
Yamada, KazutoyoIwate University
Tomita, IsaoMitsubishi Heavy Industries, Ltd
Hayashi, YoshihiroMitsubishi Heavy Industries, Ltd
Oka, NobuhitoMitsubishi Heavy Industries Engine & Turbocharger, Ltd
 
16:40-17:05, Paper WePM14.5 
Effect of Double Air Injection on Performance Characteristics of Centrifugal Compressor (Influence on the Pressure Recovery in the Diffuser)
Hirano, ToshiyukiHosei University
Tsujita, HoshioHosei University
 
WePM15 Room E
Aerodynamic and Design of Turbine-2 Technical Session
 
15:00-15:25, Paper WePM15.1 
Structurally-Parametrical Optimization of “aggressive” Intermediate Ducts of Bypass Turbofan Engines by Means Principal Components Method and CFD
Vinogradov, KirillPJSC "UEC-Saturn"
Remizov, AlexanderPJSC "UEC-Saturn"
Vinogradova, OlgaPJSC "UEC-Saturn"
 
15:25-15:50, Paper WePM15.2 
Three-Dimensional Aerodynamic Design Optimization of Multistage Turbine Blades in a Heavy-Duty Gas Turbine
Poursamad, AmirMAPNA Turbine Engineering and Manufacturing Co. (TUGA)
Motamedi Zoka, HamidMapna Turbine Blade Engineering & Manufacturing Co
Shirzadi, MohammadrezaMapna Turbine Engineering and Manufacturing Co. (TUGA)
 
15:50-16:15, Paper WePM15.3 
Experimental and Numerical Studies on Aerodynamic Performance of High-Lift LP Turbine Airfoils with Localized Gurney Flap-Like Device
Ikehata, RyoIwate University
Funazaki, Ken-ichiIwate University
Okamura, YasuhiroIHI
 
16:15-16:40, Paper WePM15.4 
Influence of Vane Lean on Erosion and Aerodynamic Performance in High-Pressure Turbine
Arai, NaokiTokyo University of Science
Fukudome, KojiTokyo University of Science
Yamamoto, MakotoTokyo University of Science
Suzuki, MasayaJapan Aerospace Exploration Agency
 
WePM16 Room F
Digital/IT/Statistical Issues-2 Technical Session
 
15:00-15:25, Paper WePM16.1 
A Review of Information Fusion Methods for Gas Turbine Diagnostics
Zaccaria, ValentinaMälardalen University
Rahman, MoksadurEmployer
Kyprianidis, KonstantinosMälardalen University
 
15:25-15:50, Paper WePM16.2 
Development of an Air Cooled Borescope for Infrared Thermal Load Monitoring in Industrial Gas Turbine Combustors and Operational Experience
Dickhoff, JensB&B-AGEMA GmbH
Horikawa, AtsushiKawasaki Heavy Industries, Ltd
Kusterer, KarstenB&B-AGEMA GmbH
Bohn, DieterRWTH Aachen University
 
15:50-16:15, Paper WePM16.3 
Fault Diagnosis of Gas Turbine Engines Using Hybrid-Degree Dual Estimation Cubature-Based Scheme
Shen, YanyanNanjing University of Science and Technology
Khorasani, KhashayarConcordia University
 
16:15-16:40, Paper WePM16.4 
Optimization of Turbine Disc Cavity Cooling Flow Control Based on Machine Learning
Tateishi, KokiMitsubishi Heavy Industries
Yoshioka, ShinichiMitsubishi Hitachi Power Systems
Nagai, HironaoMitsubishi Hitachi Power Systems
Takenaka, RyujiMitsubishi Hitachi Power Systems
 
WeBNQPL Room A
Banquet Social Event

 
 

 
 

 

All Content © PaperCept, Inc.

This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2019 PaperCept, Inc.
Page generated 2019-10-29  21:19:34 PST  Terms of use