International Gas Turbine Congress 2019 Tokyo
November 17-22, 2019, Tokyo, Japan

Program at a Glance    Sunday    Monday    Tuesday    Wednesday    Thursday    Author Index    Keyword Index  

Last updated on October 29, 2019. This conference program is tentative and subject to change

Technical Program for Monday November 18, 2019

To show or hide the keywords and abstract (text summary) of a paper (if available), click on the paper title
Open all abstracts   Close all abstracts
 
MoOPPL Room A
Opening Forum
 
MoILPL Room A
Plenary Session-1 Plenary Session
 
09:15-10:15, Paper MoILPL.1 
NASA Aeronautics Overview and Propulsion Challenges
Heidmann, JamesNASA Glenn Research Center
 
MoAM11 Room A
New Engine Development Technical Session
 
10:35-11:25, Paper MoAM11.1 
Key Technologies for Future Aircraft Engines
Haselbach, FrankRolls-Royce
 
11:25-11:50, Paper MoAM11.2 
Research on a Fighter Engine
Kawase, MotoyukiAir Systems Research Center, Acquisition, Technology & Logistics
Edahiro, MikaAir Systems Research Center, Acquisition, Technology & Logistics
Suganuma, WakanoAir Systems Research Center, Acquisition, Technology & Logistics
Takamura, RintaroAir Systems Research Center, Acquisition, Technology & Logistics
Oyobe, TomonoriAir Systems Research Center, Acquisition, Technology & Logistics
Takahara, YujiAir Systems Research Center, Acquisition, Technology & Logistics
Kimura, TakehikoIHI Corporation
Matsumoto, YuutaIHI Corporation
Miyairi, YoshikiAir Systems Research Center, Acquisition, Technology & Logistics
 
11:50-12:15, Paper MoAM11.3 
Outline of JAXA's Project: Advanced Fan Jet Research (aFJR)
Nishizawa, ToshioJapan Aerospace Exploration Agency
 
MoAM12 Room B
Internal Cooling Technical Session
 
10:35-11:00, Paper MoAM12.1 
Study on Heat Transfer of a Rotational Turbine Blade System
Amano, RyoichiUniversity of Wisconsin-Milwaukee
 
11:00-11:25, Paper MoAM12.2 
Experimental Heat Transfer Study of Jets Impinging on a Curved Surface
Forster, MariusUniversity of Stuttgart
Poser, RicoUniversity of Stuttgart
Rodriguez, JoseSiemens GP
Starke, AnneSiemens
Weigand, BernhardUniversity of Stuttgart
 
11:25-11:50, Paper MoAM12.3 
Numerical Study of Heat Transfer Enhancement of the Channel with Optimized V-Shaped Ribs and Dimples
Xie, YinShanghai Jiao Tong University
Rao, YuShanghai Jiao Tong University
 
11:50-12:15, Paper MoAM12.4 
A Numerical Study of the Flow and Heat Transfer in Channels with the Detached Pin Fin Arrays
Liang, CeShanghai Jiao Tong University
Rao, YuShanghai Jiao Tong University
 
MoAM14 Room D
Unsteady Flow and Flow Control-1 Technical Session
 
10:35-11:00, Paper MoAM14.1 
Unsteady Flow Field Analysis of High Bypass Fan at Near-Stall Condition
Zhang, KaiSJTU
Park, Warn GyuPuan National University
Wang, A. J.SJTU
 
11:00-11:25, Paper MoAM14.2 
Effect of Blade Setting Angle on Damping Role of Turbine Guide Vanes Downstream of an RDC
Asli, MajidTechnical University of Berlin
Stathopoulos, PanagiotisTechnical University of Berlin
Paschereit, Christian OliverTechnical University of Berlin
 
11:25-11:50, Paper MoAM14.3 
Axial-Gap Size Effect on the Unsteady Flow Field at Midspan in a 1.5-Stage Low-Pressure Turbine
Oettinger, MarcelLeibniz Universität Hannover
Henke, MichaelLeibniz Universität Hannover
Herbst, FlorianLeibniz Universität Hannover
Seume, Joerg R.Institute of Turbomachinery and Fluid Dynamics, Leibniz Universi
 
11:50-12:15, Paper MoAM14.4 
Enhanced Synthetic-Eddy-Method for Generating Moving Incoming Wakes and Turbulence in Scale-Resolving Simulations
Zieße, MarkLeibniz Universität Hannover
Müller, ChristophLeibniz Universität Hannover
Seume, Joerg R.Institute of Turbomachinery and Fluid Dynamics, Leibniz Universi
Herbst, FlorianLeibniz Universität Hannover
 
MoAM16 Room F
Aerodynamic and Design of Axial Compressors-1 Technical Session
 
10:35-11:00, Paper MoAM16.1 
Suppression of a Hub-Corner Separation in a Stator Cascade of a Transonic Axial Compressor Using an Inverse Design Method Based on Meridional Viscous Flow Analysis
Saito, SeishiroKyushu University
Watanabe, KeisukeKyushu University
Furukawa, MasatoKyushu University
Yamada, KazutoyoIwate University
Matsuoka, AkinoriKawasaki Heavy Industries, LTD
Niwa, NaoyukiKawasaki Heavy Industries, Ltd
 
11:00-11:25, Paper MoAM16.2 
The Influence of Sweep on Aerodynamic Performance of a 1.5-Stage Highly Loaded Axial Compressor
Huang, SongInstitute of Engineering Thermophysics, Chinese Academy of Scien
Yang, ChengwuInstitute of Engineering Thermophysics, Chinese Academy of Scien
Wang, MingyangInstitute of Engineering Thermophysics, Chinese Academy of Scien
Lu, XingenInstitute of Engineering Thermophysics, Chinese Academy of Scien
 
11:25-11:50, Paper MoAM16.3 
Effect of Forward-Swept Rotor on Stall Margin in an Axial Flow Compressor at Distorted Inflow Condition
Hamaguchi, KyonosukeWaseda University
Sakata, YuuWaseda University
Fujisawa, NobumichiWaseda University
Ohta, YutakaWaseda University
Kato, DaiIHI Corporation
 
MoPM11 Room A
Acoustic Issues Technical Session
 
14:00-14:25, Paper MoPM11.1 
Experimental Modeling of Flow Characteristics and Measurements in an Aircraft Engine Using Hot-Wire Technique
Shiplyuk, AleksandrKhristianovich Institute of Theoretical and Applied Mechanics SB
Lebiga, VadimKhristianovich Institute of Theoretical and Applied Mechanics
 
14:25-14:50, Paper MoPM11.2 
Numerical Simulation of Acoustic Liner Performance in Grazing Flow Using Cartesian-Mesh CFD
Iwafune, TsubasaKanazawa Institute of Technology
Sasaki, DaisukeKanazawa Institute of Technology
Nomura, TakeruKanazawa Institute of Technology
Toh, HidemiKanazawa Institute of Technology
Ishii, TatsuyaJAXA
 
14:50-15:15, Paper MoPM11.3 
Noise Tests Using Small Turbofan Engine DGEN380
Ishii, TatsuyaJAXA
Nagai, KenichiroJAXA
Oinuma, HideshiJAXA
Oishi, TsutomuIHI
Ishii, YutakaBruel & Kjaer Japan
 
MoPM12 Room B
Blade Cooling Technical Session
 
14:00-14:25, Paper MoPM12.1 
Large Eddy Simulation of Film Cooling Performance of Smooth Cutback Surface at Airfoil Trailing Edge Improved by Pulsating Cooling Flow
Tokutake, TaroTokyo University of Agriculture and Technology
Murata, AkiraTokyo University of Agriculture and Technology
Nakajima, DaichiTokyo University of Agriculture and Technology
Yamamoto, ShoheiTokyo University of Agriculture and Technology
Iwamoto, KaoruTokyo University of Agriculture and Technology
 
14:25-14:50, Paper MoPM12.2 
Effects of Cooling Flow Pulsation on Film Cooling Performance Over Smooth Cutback Surface at Airfoil Trailing Edge Measured by Transient Technique with Compensation of Three-Dimensional Heat Conduction
Yamamoto, ShoheiTokyo University of Agriculture and Technology
Murata, AkiraTokyo University of Agriculture and Technology
Taniguchi, HitoshiTokyo University of Agriculture and Technology
Hayakawa, HirotoTokyo University of Agriculture and Technology
Iwamoto, KaoruTokyo University of Agriculture and Technology
 
14:50-15:15, Paper MoPM12.3 
Adiabatic Film Cooling Effectiveness on Blade Tip with Various Slot Cooling Height
Bang, MinhoYonsei University
Kim, JeongJuYonsei University
Choi, SeungyeongYonsei University
Park, Hee SeungYonsei University
Moon, Hee-KooYonsei University
Cho, Hyung HeeYonsei University
 
MoPM14 Room D
Alloy Development for Disks Technical Session
 
14:00-14:25, Paper MoPM14.1 
Creep Property of Powder Metallurgy Ni-Base Turbine Disc Superalloy Designed from a Conventionally Cast Superalloy, TM-47
Mori, YuhiNational Institute for Materials Science
Kawagishi, KyokoNational Institute for Materials Science
Osada, ToshioNational Institute for Materials Science
Harada, HiroshiNational Institute for Materials Science
Yuyama, MichinariNational Institute for Materials Science
Takata, YujiNational Institute for Materials Science
Osawa, MakotoNational Institute for Materials Science
Ikeda, AyakoNational Institute for Materials Science
 
14:25-14:50, Paper MoPM14.2 
Effect of Microstructure on Tensile Properties of PM-Ni Base Alloy720Li
Kanno, NaoyaIHI Corporation
Tsuno, NobuyasuIHI Corporation
Higashi, MasayaIHI Corporation
Ozaki, TomomichiIHI Corporation
Yamane, KoushirouIHI Corporation
Takahashi, SatoshiIHI Corporation
 
14:50-15:15, Paper MoPM14.3 
Fatigue Behavior of a Ni-Co Base Superalloy for Turbine Disc Applications
Kobayashi, ShinichiHitachi Metals Ltd
Ono, YoshinoriNational Institute for Materials Science
Osada, ToshioNational Institute for Materials Science
Ii, SeiichiroNational Institute for Materials Science
Kawagishi, KyokoNational Institute for Materials Science
Date, MasayoshiHitachi Metals Ltd
Ohno, TakehiroHitachi Metals Ltd
 
MoPM15 Room E
Aerodynamic and Design of Turbine-1 Technical Session
 
14:00-14:25, Paper MoPM15.1 
An Investigation on the Flow Field in the Turbine Exhaust Diffuser for Vehicular Turbocharger
Kiriaki, TakuroIHI Corporation
Kaneko, YudaiIHI Corporation
Morita, IsaoIHI Corporation
Bamba, TakahiroIHI Corporation
 
14:25-14:50, Paper MoPM15.2 
Effects of Velocity Triangle on the Loss Generation in Low Pressure Turbine Blades under the Upstream Incoming Wake
Okamura, YasuhiroIHI
Hamabe, MasaakiIHI Corporation
Funazaki, Ken-ichiIwate University
 
14:50-15:15, Paper MoPM15.3 
Nozzle Vane Design to Reduce Mass Flow Hysteresis in Variable Geometry Turbochargers
Gupta, BipinMitsubishi Heavy Industries, Ltd
Yoshida, ToyotakaMitsubishi Heavy Industries, Ltd
Danmoto, YosukeMitsubishi Heavy Industries, Ltd
Akiyama, YoujiMitsubishi Heavy Industries, Ltd
 
MoPM16 Room F
Aerodynamic and Design of Axial Compressors-2 Technical Session
 
14:00-14:25, Paper MoPM16.1 
Variable Stator Vane Penny Gap Aerodynamic Measurements and Numerical Analysis in an Annular Cascade Wind Tunnel
Pohl, DanielRWTH Aachen University
Janssen, JohannesRWTH Aachen University
Jeschke, PeterRWTH Aachen University
Halcoussis, AlexanderMTU Aero Engines AG
Wolf, HannesMTU Aero Engines AG
 
14:25-14:50, Paper MoPM16.2 
Rotor Performance of an Axial Flow Compressor at Free and Highly Loaded Windmilling Conditions
Zhang, WenboWaseda University
Fujisawa, NobumichiWaseda University
Ohta, YutakaWaseda University
Goto, TakashiIHI Corporation
Kato, DaiIHI Corporation
 
14:50-15:15, Paper MoPM16.3 
Investigation of Unsteady Compressor Behavior under Transient Conditions
Yamashita, SatoshiMitsubishi Heavy Industries, Ltd
Mito, RyosukeMitsubishi Heavy Industries
Koike, YujiMitsubishi Heavy Industries, Ltd
Kishi, MakotoMitsubishi Heavy Industries, Ltd
Takaki, KazushigeMitsubishi Heavy Industries, Ltd
 
MoPDPL Room A
Panel - Future of Aircraft Propulsion Technology: A Manufacturers'
Perspective
Panel Discussion
 
15:35-17:35, Paper MoPDPL.1 
Future of Aircraft Propulsion Technology: A Manufacturers' Perspective
Heidmann, JamesNASA
Haselbach, FrankRolls-Royce
Kato, DaiIHI Corporation
Sakai, YusukeKawasaki Heavy Industries
Ushida, MasanoriMitsubishi Heavy Industries Aero Engines
Niikura, TakayukiMinistry of Economy, Trade and Industry

 
 

 
 

 

All Content © PaperCept, Inc.

This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2019 PaperCept, Inc.
Page generated 2019-10-29  21:19:34 PST  Terms of use